IndyWatch DIY and Building Feed Archiver | |
Go Back:30 Days | 7 Days | 2 Days | 1 Day |
|
IndyWatch DIY and Building Feed was generated at Community Resources IndyWatch. |
Welly Boot Rack Recent Project Plans
First, cut the boards using a compound miter saw or circular saw, following the cut list.
Cut the longest cuts first, to maximize material use.
Then, mark location of holes to drill on the longer 2x3 boards. Drill a pilot hole all the way through at the marks.
Then, using a 7/8" spade bit, drill halfway through the same pilot hole. TIP: Tape the drill bit to guide the depth of hole you are drilling.
Apply glue to bottom of the dowels.
Place dowels in the holes and screw from bottom through the predrilled pilot hole to secure.
Attach the two rows of dowels to the bottom 2x3s with screws.
This welly boot rack really is t...
Go Back:30 Days | 7 Days | 2 Days | 1 Day
Adding a reclaimed wooden gate and front porch step to a garden shed Funky Junk Interiors
Wish for a charming garden gate that could hide storage or just add quaintness to your yard? Heres how a reclaimed wooden gate and a front porch step was added to a shed for instant enhancement! This post contains some affiliate links in which I earn a small percentage from qualifying purchases through these links, []
The post Adding a reclaimed wooden gate and front porch step to a garden shed appeared first on Funky Junk Interiors.
MY Maker PCBA: Your Electronics For A Better Planet Contest at Maker Faire Rome 2023 Make: DIY Projects and Ideas for Makers
This year Maker Faire Rome: The European Edition and FAE Technology launch the contest MY Maker PCBA: Your Electronics for a Better Planet to rewards the most innovative projects in areas related to environmental sustainability.
The post MY Maker PCBA: Your Electronics For A Better Planet Contest at Maker Faire Rome 2023 appeared first on Make: DIY Projects and Ideas for Makers.
Smart3: The Self-Solving Rubiks Cube Make: DIY Projects and Ideas for Makers
In the summer of 2015, I went to my first Maker Faire, in Tokyo, Japan. Afterward, I could only think about the challenge of making something. It moved me so much that I left the company where I worked as a programmer for 16 years and became a full-time maker. I challenged myself to create something []
The post Smart3: The Self-Solving Rubiks Cube appeared first on Make: DIY Projects and Ideas for Makers.
A Can Full of Tone Make: DIY Projects and Ideas for Makers
Vintage Gibson electric guitars had a special circuit for modifying the sound of the pickups: the Vari Tone (Figure A). You could set the knob to get six different guitar sounds, from a funky nasal tone to a full-bodied for your own guitar that you can build []
The post A Can Full of Tone appeared first on Make: DIY Projects and Ideas for Makers.
IndyWatch DIY and Building Feed Archiver | |
Go Back:30 Days | 7 Days | 2 Days | 1 Day |
|
IndyWatch DIY and Building Feed was generated at Community Resources IndyWatch. |